PMR Industries manufactures and supplies electrical fasteners, insulated connectors, nuts, bolts, and automobile parts, built for the people who have to trust a connection they can't see once it's installed — up a pole, inside a panel, or bolted into a structure.
Every product that leaves our facility is made in India, tested for safety, and built to the same standard whether it's headed to a single site engineer or a nationwide distribution order.
A quick look at everything we manufacture and supply. Tap any product to see full specs, sizes, and applications.
JPC connectors tap a branch cable into a live main line straight through its insulation — no stripping, no exposed conductor. Six models available.
Read More →M10 × 40 mm hex bolt and nut, machined from aluminium for jobs where every gram counts — without giving up strength or thread precision.
Read More →M10 × 92 shear head bolt in mild steel — torque it home and the head shears cleanly away, leaving nothing for anyone to grip and reverse.
Read More →
An insulated clamp body with serrated aluminium jaw plates and a galvanized wire bail, built to grip and suspend aerial bundled cable from a pole.
Read More →
Stainless steel nyloc nuts with a nylon insert that resists loosening under vibration, ideal for machinery and outdoor installations.
Read More →
Knurled aluminium connector pins from our midspan joint kit, machined for a secure grip and consistent fit when splicing cable runs.
Read More →
Small metal sleeve couplers used to join pipe or conduit sections, sized for a snug, secure fit.
Read More →
Anchors and supports 11KV Medium Voltage Covered Conductor on overhead distribution lines, with a hot-dip galvanized U-bolt and UV-stabilized polymer insert.
Read More →
A midspan joint kit fitted with 4 shear head bolts, torqued to a preset shear point for a tamper-resistant, consistent clamp on every splice.
Read More →
A 6-bolt midspan joint kit combining standard clamping bolts with a shear head bolt, giving extra grip on larger cable runs plus tamper-resistant security.
Read More →
An 8-bolt midspan joint kit for larger cable runs, delivering maximum clamping force and even pressure distribution across the full splice length.
Read More →JPC connectors tap a branch cable into a live main line straight through its insulation — no stripping, no exposed conductor. Six models cover everything from 2.5 mm² service taps to 240 mm² mains.
Every JPC connector is UV-stabilized and weather-sealed for outdoor spans, and installs single-handed with a standard spanner — no special tooling required on site.
| Code | Main (mm²) | Tap (mm²) | Bolt | Torque |
|---|---|---|---|---|
| JPC 95 10 | 16–95 | 2.5–10 | 1×M6 | 7–11 Nm |
| JPC 95 70 | 10–95 | 4–70 | 1×M8 | 9–12 Nm |
| JPC 95 95 | 16–95 | 16–95 | 1×M8 | 9–12 Nm |
| JPC 150 50 | 16–150 | 4–50 | 1×M8 | 12–16 Nm |
| JPC 150 150 | 16–150 | 16–150 | 1×M8 | 12–16 Nm |
| JPC 240 120 | 25–240 | 16–120 | 1×M8 | 16–18 Nm |
| JPC CC 120 | 50–120 | 50–120 | 2×M8 | 16–20 Nm |
| JPC CC 241 | 95–241 | 95–241 | 2×M10 | 34–36 Nm |
M10 × 40 mm hex bolt and nut, machined from aluminium for jobs where every gram counts — without giving up strength or thread precision.
A natural-finish aluminium bolt and nut set with precision metric threading, offered across three aluminium grades to match your application.
| Material | Aluminium |
| Thread type | Metric thread |
| Size | M10 × 40 mm |
| Finish | Natural aluminium finish |
| Grades | 6060 / 6061 / 6063 |
M10 × 92 shear head bolt in mild steel — torque it home and the head shears cleanly away, leaving nothing for anyone to grip and reverse.
High-strength mild steel with a zinc-plated finish, built for permanent, secure installations where tamper resistance matters.
| Product | Shear Head Bolt, M10 × 92 |
| Material | MS (Mild Steel) |
| Finish | Zinc plated |
Designed to securely anchor and support 11KV Medium Voltage Covered Conductor (MVCC) on overhead distribution lines, with excellent mechanical strength and long-lasting performance even in harsh conditions.
An aluminium alloy wedge and UV-stabilized polymer insert combine for a firm, lasting grip on the conductor, while the hot-dip galvanized U-bolt shrugs off corrosion in outdoor, high-tension environments.
| Application | 11KV MVCC Overhead Lines |
| Conductor Type | MVCC (Covered Conductor) |
| Rated Voltage | Up to 11KV |
| Material - Wedge | Aluminium Alloy |
| Material - Insert | UV Stabilized Polymer |
| Material - U-Bolt | Mild Steel (Hot Dip Galvanized) |
| Surface Finish | Hot Dip Galvanized |
| Breaking Load | ≥ 10kN |
| Standard | As per IS / IEC Standards |
| Installation | Pole / Structure Mounted |
| Weight (Approx.) | 2.50 Kg ± 5% |
Beyond off-the-shelf hardware — support built around how you actually order, build, and dispatch.
Bolts, connectors, and fasteners machined to your drawings, sizes, and material specs.
Large-volume orders fulfilled reliably for distributors, EPC contractors, and utilities.
ISO 9001:2015 and RoHS-aligned inspection at every stage, with test reports on request.
Scheduled dispatch and tracked delivery so site timelines aren't held up on our end.
Help choosing the right connector size, bolt grade, or torque spec for your application.
What buyers tell us keeps them coming back.
Every product manufactured and checked to a consistent, premium standard.
Tight tolerances on threads, dimensions, and finishes across every batch.
Manufacturer-direct pricing without compromising on materials or finish.
Orders scheduled and dispatched reliably, so your site never waits on us.
Guaranteed — we stand behind every connector, bolt, and fastener we ship.